Sine Wave Series

The Sine Wave Series from ICT is an intelligent, high-performance, 1500-watt pure sine wave inverter that includes a secure, easy-to-use web-browser interface, providing remote monitoring and power control with alarm reporting over an Ethernet link, along with SNMP support for integration into your wireless network management system.

Ideal for providing critical, uninterruptable AC power to AC-powered network devices.


  • 1500 watts of output power / 3000-watt surge capability
  • 115 VAC output
  • 12-, 24- or +/- 48-volt DC input models
  • Standard TCP/IP Ethernet communications provides full monitoring and control capabilities
  • Standard static transfer switch for automatic transfer to battery when AC mails fails
  • Low voltage disconnect for when battery becomes discharged
  • Network watchdog feature will cycle power to connected network devices of no response ping is received
  • Alarm reporting via text or email notification
  • Rackmount kit option for 19-inch rack installation
  • Two-year warranty


  • Reduce total cost of ownership by reducing site visits and maintenance costs due to remote monitoring and control functionality
  • Improve the quality of service and uptime of your network by quickly resolving power issue remotely
  • Remotely power cycle connected AC load devices
  • All connection points are external, allowing for quick and easy installation
  • No additional software required as monitoring and control is provided via an onboard web-baser server


Continuous Output Power 1500 Watts
Surge Power Output (2 seconds) 3000 Watts
Peak Efficiency 93%
Input Voltage Range – 12V 10.5 – 16.0 VDC
Input Voltage Range – 24V 21.0 – 32.0 VDC
Input Voltage Range – 48V 42.0 – 64.0 VDC
Low Voltage Shutdown – 12V 10.5 VDC
Low Voltage Shutdown – 24V 21.0 VDC
Low Voltage Shutdown – 48V 42.0 VDC
No Load Current Draw <18 Watts
Output Voltage

Frequency Range – 115VAC

115 VAC +/- 5VAC

60Hz +/-0.2Hz

Harmonic Distortion (typical) < 3%
Dimensions (L x W x H) 12.9 x 8.1 x 2.6 inches / 328 x 205 x 65 mm
Weight 8.0 lbs / 3.6 kg
DC Input Connectors (rear) Bus bars, 5/16″ / 8mm holes
AC Outputs  

Rear – terminal block

Front – dual NEMA 5-15P

Transfer Switch Connector Rear terminal block
Remote Alarm Connectors Terminal Block (#16 to #24 AWG)
Operating Temperature Range -30°C to +60°C
All models include Form C contacts and factory installed RJ45 Ethernet port with built-in web server and intuitive graphical user interface. Allows remote monitoring of inverter conditions including battery voltage, output voltage, output power and alarm conditions. Remote management features include turning AC outputs off and on, configuring user, network, email and alert settings, and setting up the network watchdog feature for auto restarting if I.P. connectivity is interrupted. SNMPv1/2c is supported for integration with network management systems.
Two year warranty

Sine Wave 1500 Data Sheet


Sine Wave 1500 Manual

855-151-000 rev 2.8


Go to Top