FacebookLinkedIn

Distribution Series 3 10/10 GMT Fuse Panel

The Distribution Series 3 10/10 GMT fuse panel from ICT is a dual-bus DC distribution panel designed to be used in 24- and/or 48-volt DC applications.  This dual-bus panel can support dual-voltage inputs and mixed polarities and is available with 20 GMT fuse-protected outputs. Included is a secure, easy-to-use web-browser interface, which provides remote power monitoring, power control, and alarm reporting over an Ethernet link, along with SNMP support for integration into your network management system.

Software Demo
Category: Tag:

Benefits

  • Full remote monitoring and power control reduces site visits, lowering total cost of ownership and maintenance costs
  • Improve the quality of service and uptime of your network by quickly resolving power issues remotely
  • Increase battery backup time with automatic load shedding by allowing non-critical loads to be removed from the system, maintaining critical loads for longer
  • 20 outputs in a 1RU form factor supports sites with multiple load devices without occupying precious rack space
  • No additional software required as monitoring and control is provided via an onboard web-based server
  • Support mixed-voltage sites with dual-bus architecture

Features

  • Support 24, and +/- 48-volt DC applications
  • 200-amp system current / 100 amps per bus
  • Dual-bus architecture (Bus A & Bus B)
  • 20 GMT fuse output positions rated up to 16 amps continuous
  • 10 outputs per bus / 20 outputs total
  • Front-mounted fuses
  • Standard TCP/IP Ethernet communications provides full remote monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMP v1/v2c/v3
  • Reporting of total system current (Bus A & Bus B), individual load current, Bus A and Bus B system voltage, and fuse status
  • Alarm reporting via text or email notification
  • Remote individual output power toggling
  • Automatic load shedding disconnects non-critical loads when on battery power (user defined)
  • Network watchdog automatically reboots routers or switches when no response is received
  • Five digital site monitoring input contacts
  • Up to 30 days of data logging
  • Heavy duty input stud connectors on front panel
  • Form C alarm contacts
  • 1RU 19-inch rackmount form factor
  • Two-year warranty

Description

Power Specifications ICT200DF-20BRC
Operating Voltage Range (POS or Neg) 20-60VDC
System Current Rating 200A cont
A/B Bus Current Rating 100A cont
Number of Outputs per bus 10
Max. GMT Fuse Size 20A
Continuous Load Rating 16A per output

Form Factor 1RU – 19 inch rack mount
Dimensions (L x W x H) 9.4 x 19.0 x 1.7 in.

236 x 483 x 45 mm
Weight 9.5 lbs / 4.3 kg
Input Connectors Dual 1/4″ – 20 studs with 0.625″ spacing
Output Connectors Cage clamp 20-22AWG

Operating Temperature Range -20°C to +60°C
Cooling Convection

FCC, CE, ROHS

Ethernet TCP/IP built-in web server and graphical user interface, 10/100BASE-T, IEEE 802.3 compatible
Supported Protocols IPv4, HTTP, HTTPS, SMTP, DNS, TCP, UDP, ICMP, DHCP, ARP, SNMPv1/v2c/v3
SNMP Ports UDP Port 161, SNMP Traps: UDP Port 162
Firmware Upgrades Upgradable over Ethernet
Security Password protected, HTTPS encryption, TLS 1.2
20 Channel Output Monitoring Current draw measured and reported for each output, user definable under and over current alarms
Email and SMS Alerts Multiple email and text accounts with adjustable intervals
Data Logging Up to 30 days at one-minute sampling rate, CSV file download, major event logging
Network Watchdog Autonomously ping up to 12 I.P. addresses and power-cycle output if no response, definable settings
Power Cycling and Rebooting Remote on/off control of every output individually
Auto Restore Mode Return to previous output settings after a power loss
Power-up Delay Sequencing User selectable 0 to 60 seconds delay between outputs energizing
Auto Load Shedding Each output user definable, manual or auto restart

Two year warranty

Distribution Series 3 10/10 GMT Data Sheet

800-351-000

Download File

Distribution Series 3 10/10 GMT Manual

855-351-000

Download File

Related products

  •

    Distribution Series 3 Front Access

    The Distribution Series 3 front-access panel from ICT is a dual-bus DC distribution panel designed to be used in 12-, 24- or 48-volt DC applications
    • Supports +12, +24, and +/-48 volts DC applications
    • 240-amp peak system current / 200 amps continuous
    • Dual-bus architecture (Bus A & Bus B)
    • 8 fused or breaker output positions rated up to 25 amps per output
    Details

  • Distribution Series 2

    The ICT Distribution Series 2 single bus DC Distribution Panels includes models that are designed to be used in 12, 24 or 48VDC applications
    • Supports +12, +24, and +/-48 volts DC applications
    • 180-amp peak system current / 150 amps continuous
    • 12 fused output positions rated up to 25 amps (12 & 24 V) and 15 amps (48 V)
    • Front-mounted fuses with LED indicators when fuse is blown
    Details

  • Distribution Series 3 Dual Bus

    The Distribution Series 3 from ICT is a dual-bus DC distribution panel designed to be used in 12-, 24- or 48-volt DC applications
    • Supports +12, +24, and +/-48 volts DC applications
    • 200-amp peak system current / 180 amps continuous
    • Dual-bus architecture (Bus A & Bus B)
    • Total of 12 fused or breaker output positions rated up to 25 amps (12 & 24 V) and 20 amps (48 V) per output
    Details

Title

Contact a Power Specialist

Contact

Find a Distributor

Learn More

Stay Up to Date

If you would like to receive regular updates from ICT such as new product announcements, news and events, and information about upcoming technical webinars, please subscribe.

Subscribe

INNOVATIVE CIRCUIT TECHNOLOGY LTD

26921 Gloucester Way

Langley, BC, Canada V4W 3Y3

+1 877 930 0717 (NA Toll free)

+1 604 856 6303 (Local)

CONNECT WITH US

© Innovative Circuit Technology LTD. All rights reserved. | Privacy Policy |

Go to Top